|
|
We do not offer returns on this item. You are however covered by the Paypal Protection Plan by making payment with Paypal. |
If you have a
Tektronix/Xerox Phaser printer, you can add oil to your old maintenance
roller (please see adding oil link at bottom). Then, with our counter
refurbishing kit you can reset the counter to 10,000 copies, then just
replace the maintenance roller later and/or replace the oil as
necessary. It is important to know that when you purchase our counter
that you are responsible for replacing the oil in the roller, the
roller was not meant to be run dry hence why it normally needs to be
replaced if oil is not added back manually.
This kit consists of only one resetting counter coin for the
8500/8550/8560/8560MFP printer and does not include the roller and
plastic enclosure as you will reuse these from your old kit.
Some mechanical disassembly is necessary as shown in steps below. With this 4 step kit you can now reset
your counter for the 8500 without replacing the entire
roller. We offer this kit for only $29.80
free shipping to U.S and all international countries including UK,
Europe Union countries, Australia, S. America, New Zealand, Russia,
Finland, Norway, Sweden and Baltic and most East European
Nations. If you live outside of one of these countries please
let us know before purchasing as we may not be able to ship to your
country due to customs and import restrictions. This may take up to 3
weeks (but usually sooner) to clear customs so please be patient for
arrival. Also
we provide some information how to add oil to your old roller in the
appendix below so that you can save 100's of dollars in the future. Step 1-3. You will need to remove the conductive foam, bend the tabs inward, and push the old coin and holder upward. Please see picture below: Step 4. Swap the Coin with the one you bought from us and reassemble. You now have 30,000 print life. Appendix: If you have any questions please feel to free to contact us. |
Search Information: |
|
Original P8560 8550 8500 8560MFP Extended Cap Maintenance Kit for xerox printer | |
Fuji Xerox Phaser Extended Maintenance Kit (Part 109R00782) |
Search Information: |
|
If you have a Fuji Xerox Extended Capacity Maintenance Reset Kit 109R00782 printer, you can add oil to your old Fuji Xerox Extended Capacity Maintenance Reset Kit 109R00782 maintenance roller (please see adding oil link at bottom). Then, with our Fuji Xerox Extended Capacity Maintenance Reset Kit 109R00782 counter refurbishing kit you can reset the counter to 10,000 copies, then just replace theFuji Xerox Extended Capacity Maintenance Reset Kit 109R00782 maintenance roller later and/or replace the oil as necessary. It is important to know that when you purchase our Fuji Xerox Extended Capacity Maintenance Reset Kit 109R00782 counter that you are responsible for replacing the oil in the roller, the roller was not meant to be run dry hence why it normally needs to be replaced if oil is not added back manually. This Fuji Xerox Extended Capacity Maintenance Reset Kit 109R00782 kit consists of only one resetting Fuji Xerox Extended Capacity Maintenance Reset Kit 109R00782 counter coin for the Fuji Xerox Extended Capacity Maintenance Reset Kit 109R00782 printer and does not include the roller and plastic enclosure as you will reuse these from your old Fuji Xerox Extended Capacity Maintenance Reset Kit 109R00782 kit. Some mechanical disassembly is necessary as shown in steps below. With this 4 step kit you can now reset your Fuji Xerox Extended Capacity Maintenance Reset Kit 109R00782 counter for the 109R00782 without replacing the entire roller. We offer this 109R00782 kit for only $29.80 free shipping to U.S and all international countries including UK, Europe Union countries, Australia, S. America, New Zealand, Russia, Finland, Norway, Sweden and Baltic and most East European Nations.