 |
Kopy-Kat.com! introduces our E-Z C452 image drum reset kit
works for Euro C452 C552 C652 as well as North/S America and
Asia. Imaging Konica Minolta Bizhub printers. With our 4 step kit below
you will be able to reset your own drum counters for pennies on the
dollar. Just slide the drum chip into the re-setter coupling connection.
Choose the appropriate color reset (cyan, yellow, or magenta) on the
piano style dip switch (see settings below). Slide the switch and wait
until the green LED light is turned on. You now have reset your counter
to new condition, its that easy. The black chip fuse version does
not use the standard re-setter instead it uses the included chip along
with a socket that has a replaceable fuse. You can buy the green
leaded fuses in sets of four from our https://www.kopy-kat.com
website. With the black chip you will be responsible to cover all
metal contact of fuse with proper tape as insulator so that it doesn't
short out any other drum or printer electronics.
Please check out all our product listings at https://www.kopy-kat.com
How to Use Your Drum Reset Chip Tool
Step 1.
Slide on your used Minolta Color Drum Chip (Cyan, Magenta, Yellow) one at a time.
Step 2. Toggle the correct DIP Switch Setting for the type of Chip to reset (see table below):
Step 3. Flip on the reset switch.
Step 4. Wait for green light to come on. Release the reset switch, and you've now reset your Drum Chip for that color. Repeat Steps 1 through 3 for other 3 color chips. Its not necessary to match color of cyan, yellow, or magenta chips to previous usage as they can all be converted to one another by the dip switch, only black chip is physically different. When your done with resetting all your chips, store your "Infinite Minolta Drum Re-setter" for next time. Finally, install your recharged chips.
The infinite re-setter kit utilizes (3) 11.6mm AG10 equivalent watch batteries (batteries included) which will last for years without replacement, but these batteries can be bought 8 in a pack from your dollar store for just a dollar. So maintenance of this kit is indefinite and cheap.
 |
Questions & Answers FAQ
-------------
Q. How long does it take to reset with the kit after the switch is turned on?
A.
About 3 seconds the green LED light indicates a successful programming.
If this does not occur than the root cause is most probably poor
contact to the chip re-setter.
-------------
Q. What happens if the reset switch is left on and do I have to turn it back off after utilization?
A. This can't happen as the reset switch is a spring loaded momentary switch, once you let go of the switch slider it will deflect to initial off condition. Saving the battery for future use
-------------
If you have any further questions about this product please feel free to contact us. Thank you and have a nice day.